wasprofile folder not getting created during installation

[j***@yahoo.com]

I faced some problem in server.I re-installed everything.

Below are the steps which I followed

- Installed RAD.
- Included all the fix packs.All are updated successfully.
- Installed Commerce Developer Toolkit.Installed to D:/IBM/WCToolkitEE60.
- The Toolkit folder got created.But I dont see the 'wasprofile' folder under that.
- When I start the local test server , it's telling the server is started.
- When I open the Project Explorer,I dont see any of the files inside each folder.

[Brian Lima]

Post by j***@yahoo.com
I faced some problem in server.I re-installed everything.
Below are the steps which I followed
- Installed RAD.
- Included all the fix packs.All are updated successfully.
- Installed Commerce Developer Toolkit.Installed to D:/IBM/WCToolkitEE60.
- The Toolkit folder got created.But I dont see the 'wasprofile' folder under that.
- When I start the local test server , it's telling the server is started.
- When I open the Project Explorer,I dont see any of the files inside each folder.

Sounds to me like the setup.bat script wasn't run by the installer. The
most common reason for this is that the installer didn't locate the
minimum levels of software on your system. You can verify that the
setup didn't run by looking through the <WCDE_installdir>/logs/setup.log
file (if it exists).

If the file is empty (or doesn't exist) you'll need to verify that you
have the minimum software levels installed (which it sounds like you
do). If not you'll have to first upgrade. Once the software is at the
right levels you can run the setup manually.

To do so edit the <WCDE_installdir>/bin/setenv.bat file and verify the
value of the RAD_HOME variable. Once the value is set properly, just
run the setup.bat and wait for it to complete. Once done verify the
contents of the setup.log and makes sure that completes successfully.
You should then have the toolkit configured.

[j***@yahoo.com]

As you said,I didnt have the setup log file.I verified the setenv.bat file and started the setup.bat.

Log file shows the below details.

configureServer:
[configureServer] Configuring the server.
[configureServer] Setting attribute: [name, WebSphere Commerce Test Server]
[configureServer] Setting attribute: [webSphereProfileName, WCTOOL~1_133338]
[configureServer] Setting attribute: [isZeroBinaryEnabled, true]
[configureServer] Setting attribute: [isUTCEnabled, false]
[configureServer] Setting attribute: [isAutoPublishEnabled, false]
[configureServer] Finished configuring the server.

publishApplication:
[addApplication] Starting the test server.
[addApplication] Test server started, adding the application to the server.

BUILD FAILED
D:\IBM\WCTOOL~1\setup\setup.xml:73: The following error occurred while executing this line:
D:\IBM\WCTOOL~1\setup\setup.xml:143: Exception caught while adding the application to the server

Total time: 24 minutes 0 seconds
HeadlessWorkspaceSettings: RESTORED autoBuild=true maxFile=1048576
Retrieving document at 'platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl'.
Wendy in Utils: contextURL passed to Utils.getURL() is null
Wendy in Utils: path is now platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/BODs/Developer/UpdateInventoryBalance.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/BODs/Developer/UpdateInventoryBalance.xsd
Wendy in Utils: path is now ../../Resources/Nouns/InventoryBalance.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Nouns/InventoryBalance.xsd
Wendy in Utils: path is now ../Components/Common/Components.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/Components.xsd
Wendy in Utils: path is now Meta.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/Meta.xsd
Wendy in Utils: path is now Fields.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/Fields.xsd
Wendy in Utils: path is now ../CoreComponents/UnqualifiedDataTypes.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/CoreComponents/UnqualifiedDataTypes.xsd
Wendy in Utils: path is now ../Common/CodeLists.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/CodeLists.xsd
Wendy in Utils: path is now ../CoreComponents/CodeList_CurrencyCode_ISO_7_04.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/CodeLists.xsd
Wendy in Utils: path is now ../CoreComponents/CodeList_LanguageCode_ISO_7_04.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/CodeLists.xsd
Wendy in Utils: path is now ../CoreComponents/CodeList_MIMEMediaTypeCode_IANA_7_04.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/CodeLists.xsd
Wendy in Utils: path is now ../CoreComponents/CodeList_UnitCode_UNECE_7_04.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/Fields.xsd
Wendy in Utils: path is now ../CoreComponents/QualifiedDataTypes.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/CoreComponents/QualifiedDataTypes.xsd
Wendy in Utils: path is now UnqualifiedDataTypes.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/CoreComponents/QualifiedDataTypes.xsd
Wendy in Utils: path is now ../Common/CodeLists.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Common/Fields.xsd
Wendy in Utils: path is now ../Common/CodeLists.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/BODs/Developer/ShowSalesOrder.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/BODs/Developer/ShowSalesOrder.xsd
Wendy in Utils: path is now ../../Resources/Nouns/SalesOrder.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Nouns/SalesOrder.xsd
Wendy in Utils: path is now ../Components/Operational/OrderManagementComponents.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Resources/Components/Operational/OrderManagementComponents.xsd
Wendy in Utils: path is now ../Common/Components.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/PreprocessSalesOrder.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/PreprocessSalesOrder.xsd
Wendy in Utils: path is now ../Resources/Verbs/Preprocess.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/Resources/Verbs/Preprocess.xsd
Wendy in Utils: path is now ../../../../../Resources/Components/Common/Meta.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/PreprocessSalesOrder.xsd
Wendy in Utils: path is now ../../../../Resources/Nouns/SalesOrder.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/GetPaymentEntity.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/GetPaymentEntity.xsd
Wendy in Utils: path is now ../Resources/Nouns/PaymentEntity.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/GetPaymentEntity.xsd
Wendy in Utils: path is now ../../../../Resources/Components/Common/Meta.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ShowPaymentEntity.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ShowPaymentEntity.xsd
Wendy in Utils: path is now ../Resources/Nouns/PaymentEntity.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ShowPaymentEntity.xsd
Wendy in Utils: path is now ../../../../Resources/Components/Common/Meta.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ProcessPaymentAction.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ProcessPaymentAction.xsd
Wendy in Utils: path is now ../Resources/Nouns/PaymentAction.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/Resources/Nouns/PaymentAction.xsd
Wendy in Utils: path is now PaymentEntity.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/ProcessPaymentAction.xsd
Wendy in Utils: path is now ../../../../Resources/Components/Common/Meta.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl
Wendy in Utils: path is now ../../xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/AcknowledgePaymentAction.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/AcknowledgePaymentAction.xsd
Wendy in Utils: path is now ../Resources/Nouns/PaymentAction.xsd
Wendy in Utils: contextURL passed to Utils.getURL() is platform:/resource/WebServicesRouter/WebContent/xsd/OAGIS/9.0/Overlays/WebSphereCommerce/9.1/BODs/AcknowledgePaymentAction.xsd
Wendy in Utils: path is now ../../../../Resources/Components/Common/Meta.xsd

[Brian Lima]

Post by j***@yahoo.com
As you said,I didnt have the setup log file.I verified the setenv.bat file and started the setup.bat.
Log file shows the below details.
[configureServer] Configuring the server.
[configureServer] Setting attribute: [name, WebSphere Commerce Test Server]
[configureServer] Setting attribute: [webSphereProfileName, WCTOOL~1_133338]
[configureServer] Setting attribute: [isZeroBinaryEnabled, true]
[configureServer] Setting attribute: [isUTCEnabled, false]
[configureServer] Setting attribute: [isAutoPublishEnabled, false]
[configureServer] Finished configuring the server.
[addApplication] Starting the test server.
[addApplication] Test server started, adding the application to the server.
BUILD FAILED
D:\IBM\WCTOOL~1\setup\setup.xml:143: Exception caught while adding the application to the server
Total time: 24 minutes 0 seconds
HeadlessWorkspaceSettings: RESTORED autoBuild=true maxFile=1048576
Retrieving document at 'platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl'.
Wendy in Utils: contextURL passed to Utils.getURL() is null

The publishApplication task can fail for a number of reasons, such as a
local firewall program blocking connections. Usually this situation is
easily recoverable. Try the following:

- Start the toolkit. All projects should be configured.
- Start the WAS test server. Verify that the server started properly.
- Add the WC application to the test server using the 'Add/remove
projects' dialog.
- Verify that the WC application starts properly now.

[Mario Leal]

Post by Brian Lima

Post by j***@yahoo.com
As you said,I didnt have the setup log file.I verified the setenv.bat
file and started the setup.bat.
Log file shows the below details.
[configureServer] Configuring the server.
[configureServer] Setting attribute: [name, WebSphere Commerce Test Server]
[configureServer] Setting attribute: [webSphereProfileName,
WCTOOL~1_133338]
[configureServer] Setting attribute: [isZeroBinaryEnabled, true]
[configureServer] Setting attribute: [isUTCEnabled, false]
[configureServer] Setting attribute: [isAutoPublishEnabled, false]
[configureServer] Finished configuring the server.
[addApplication] Starting the test server.
[addApplication] Test server started, adding the application to the server.
BUILD FAILED
D:\IBM\WCTOOL~1\setup\setup.xml:73: The following error occurred while
D:\IBM\WCTOOL~1\setup\setup.xml:143: Exception caught while adding the
application to the server
Total time: 24 minutes 0 seconds
HeadlessWorkspaceSettings: RESTORED autoBuild=true maxFile=1048576
Retrieving document at
'platform:/resource/WebServicesRouter/WebContent/wsdl/WebSphereCommerce/WebSphereCommerce-OMS.wsdl'.
Wendy in Utils: contextURL passed to Utils.getURL() is null

The publishApplication task can fail for a number of reasons, such as a
local firewall program blocking connections. Usually this situation is
- Start the toolkit. All projects should be configured.
- Start the WAS test server. Verify that the server started properly.
- Add the WC application to the test server using the 'Add/remove
projects' dialog.
- Verify that the WC application starts properly now.

You must be aware that to install WebSphere Commerce Developer with
success, the WebSphere Application Server Test Environment must be at
least at 6.0.2.5 and not above 6.0.2.9 (the last FixPacks 11,23,15 won't
let Commerce Developer install correctly)

Hope this help

[Brian Lima]

Post by Mario Leal
You must be aware that to install WebSphere Commerce Developer with
success, the WebSphere Application Server Test Environment must be at
least at 6.0.2.5 and not above 6.0.2.9 (the last FixPacks 11,23,15 won't
let Commerce Developer install correctly)
Hope this help

It is true that the installer will incorrectly claim your WAS test
server does not meet the minimum requirements if you have something
above 6.0.2.9 installed. There is, however, a way around this problem.
Please refer to the following for three different solutions:

http://www-1.ibm.com/support/docview.wss?uid=swg21243206